Sentence examples for objective plane from inspiring English sources

The objective plane is projected via a 250 mm achromatic lens onto the CCD chip.

The resulting illuminated area in the objective plane is 25 μm in diameter.

To avoid additional systematic errors, for example by photobleaching or mechanical drift out of the objective plane, also the filter which was used first had been alternated from sequence to sequence.

UV light was delivered to the objective plane of the microscope by an optical fiber and relayed through the 63× water immersion objective to form a spot of 2 3 μm.

P1,2 are illumination and collection pupil functions at the objective plane, respectively, expressed as a function of a normalized radial coordinate ρ, defined as where r p is the radial coordinate at the objective lens pupil plane and aobj is the radius of the pupil.

A pair of telescope lenses expand the beam with a magnification of 3x to fill the rear pupil of the objective lens, and also images the MEMS scanner onto the back focal plane of the objective lens, which is necessary for telecentric scanning in the object plane.

Through static and dynamic feature points matching on the objective target plane and the observation of movement compensation for benchmark instability, the three-component motion detection (lateral displacement, wind deviation of uplifting and torsion angle) of catenary suspension structure was realized, including the contact wire, messenger wire and dropper.

As a result, the zero-order and 1st-order spots, originally focused at the objective focal plane, z0, come to focus at a distance z0+Δz.

Analysis of holographic beam propagation around the objective focal plane has been done with a double microscope already described in Ref. [14], [22].

This was accomplished by axially displacing the zero-order spot away from the objective focal plane (by illuminating the LCOS-SLM with a slightly converging beam) while maintaining the +1st-order spot at the objective focal plane using a suitable hologram addressed to the LCOS-SLM [27].

To compare the experimental axial propagation with the theory, we have implemented in the software the possibility of determining, for each phase-hologram, ΦSLM x,y), the tri-dimensional intensity profile of the corresponding beam around the objective focal plane.