Sentence examples for o2 pressure from inspiring English sources

The hydrophobic surface of PDMS was made hydrophilic through oxygen plasma treatment (O2 pressure: 0.2 mbar, 99 W power) for 3 min (Sample C).

Briefly, prepared PDMS strips (10 × 30 × 5 mm) were fixed in custom-built stretching stages, and stretched by strain of 15%, then treated with oxygen plasma for 10 min (O2 pressure: 0.2 mbar, 99 W power).

As the O2 pressure increased from 0.05 Pa to 6 Pa, the band gap of BeZnOS displayed an interesting bowing behavior.

By appropriate adjustment of O2 pressure during the deposition, the grown films exhibited a single-phase hexagonal structure and good crystalline quality.

However, at an O2 pressure ≥2 atm an enhanced electrocatalytic property of PtV/C compared with Pt/C is revealed.

Increasing the O2 pressure and NaOH concentration facilitated the conversion of HFCA to FDCA over the supported Au.

The relative intensity of the oxide component depended strongly on O2 pressure and, thus, on the equilibrium coverage of O2.

However, the low transition O2 pressure necessitates a high vacuum that is required for desorption, hence limiting its application.

After this, the ORR activity of PtV/C at O2 pressure 1 atm is higher than that of Pt/C.

where the O2 pressure is assumed to be 1 atm.

The devices at the 10% O2 pressure ratio had the highest yield of approximately 75%, while at O2 pressure ratio of around 50%, the yield reduces to 58%.