Sentence examples for o prepared from inspiring English sources

It is found that the catalyst K/Pd/Co3Al(O) prepared by successive impregnation displays the lowest characteristic temperatures including the initial and final combustion temperatures (Ti and Tf).

Siloxane 1 o was obtained as a single enantiomer from 2 o (prepared by ring opening of the corresponding non-racemic terminal epoxide)[ 15] demonstrating that enantioenriched six-membered cyclic siloxanes are also easily accessed.

Figure 4 SEM images of Na 7 (H 3 O Nb 6 O 19 ·14H 2 O precursor prepared at different NaOH concentrations: a, b 0.5 0.8 M, and c, d 1 1.5 M. The thermal decomposition process of Na7(H3O)Nb6O19·14H2O is shown in Figure 5a.

FeN/N-rG-O, CoN/N-rG-O, FeCoN/N-rG-O, NiN/N-rG-O are prepared using this method, and all have shown pronounced cyclability and considerable high capacity value.

Carbon nanocoils (CNCs) have been synthesized by thermal chemical vapor deposition (CVD) using Fe Sn–O catalyst prepared by a sol gel process.

Figure 2 SEM and TEM images of Zn 1− x Cu x O samples prepared for different reaction times.

The morphology and microstructure of the porous Zn Sn–O nanocubes prepared at different calcination temperatures are shown in Fig. 3.

Open image in new window Figure 3 FTIR of PTSA-doped TANI/Fe 3 O 4 prepared with different molar ratios of PTSA to NPPD.

(a, b, c) FE-SEM images of Zn1−xCu x O nanostructures prepared at 750°C for 60, 30, and 5 min, respectively.

Electrochemical evaluation reveals that the porous Zn Sn–O nanocubes prepared at 600 °C exhibited a good rate capability and high reversible capacity of 700 mAh g−1 at a current density of 200 mA g−1 after 50 cycles.

For the quantitative analysis of α-terpinene, p-cimene and mircene, at 40 °C, three stock solutions O were prepared using 10 mg of each analytes and dissolving them in 100 mL of diethyl ether.