Sentence examples for nut tightening from inspiring English sources

In order to improve the installation torque of the jumbolter, a torque multiplier can be used on the jumbolter to multiply the nut tightening torque when installing bolt.

Insert a ⁄ inch (1.0 cm) hex bolt through this hole with a flat washer on the head of the bolt, place another washer on the threaded end, and then install the hex nut, tightening it snugly.

Again, using a split washer and a lock nut, tighten the bolt.

The methods for improving bolt-nut tightening torque include: (1) high torque jumbolter.

In terms of the equipment for bolting, there are two main methods for increasing bolt's prestress (Kang and Wang 2007): one is to increase the bolt-nut tightening torque; the second is to use a bolt tensioning device, which is similar to imposing large prestresses on anchor bolts.

Place a socket wrench over the nut and tighten the nut until it no longer turns.

Secure the bolt to the inside of the can with the third nut, then tighten the nut outside the can until it is flush with the can.

Loosen the small nut and tighten the larger nut.

For each mini-strut, undo the bottom washer and nut, thread the bolt through, re-fasten the bottom washer and nut, and tighten it up.

The compression nut was tightened, approximately one half-turn beyond the point that initial resistance was felt, to compress the Belleville washers within the implant's compression chamber.

Assure that the locking nut is tightened properly.