Sentence examples for number of studs from inspiring English sources

Test parameters included the type of decks, number of studs, and diameter of studs.

Studs were embedded circularly around the anchored rebar with 10 and 20 cm diameter and number of studs was 4, 6 and 8 in each layer.

The beam hinging mechanism can be achieved at the end of the SFRCC slab by the arrangement of a sufficient number of studs and rebars in the SFRCC slab.

Parametric numerical study is also conducted to investigate the effect of the number of studs, slab size, and the amount of rebar on the elastic stiffness and strength of the proposed connection.

The timber frame in particular, is modelled as a mechanism, having only two DoFs (regardless of the number of studs) corresponding to the horizontal and rotational displacements of the header beam.

Test results revealed that embedded studs increased the pullout capacity of cast in place anchored rebar, increasing the number of studs increased the pullout capacity gradually; however, there was no meaningful difference in the pullout capacity of anchored rebar with the increase of stud layer.

So far, reduced bone mass at the metacarpal bone shaft in RA has been documented in a number of stud-ies using Digital X-ray Radiogrammetry (DXR) [ 1, 3- 5] or at the hand by Dual X-ray Absorptiometry (DXA) [ 3, 6- 8].

This controlled for slight variation in the total numbers of stud and dud males in a cage (because of the odd fly dying or escaping).

Keeping constant the compressive strength of concrete, diameter and embedment length of anchored rebar, influence of number of embedded studs and distance between the circular surrounding studs and anchored rebar were chosen as the experimental parameters.

The effects of headed stud diameter, infill steel plate thickness, concrete panel thickness, number of headed studs as well as aspect ratio of shear wall on the maximum stud shear force are analyzed.

Asos claims codes on the boxes with the contaminated belts match those supplied by Haq and that the discrepancies over the number of metal studs is due to the belts all being handmade.