nozzle temperature

USAGE SUMMARY

The phrase "nozzle temperature" is correct and usable in written English.
It can be used in contexts related to engineering, thermodynamics, or fluid dynamics, where the temperature of a nozzle is relevant to the discussion. Example: "The nozzle temperature must be monitored closely to ensure optimal performance of the engine."

✓ Grammatically correct

Science

Engineering

Manufacturing

Human-verified examples from authoritative sources

Exact Expressions

21 human-written examples

The nozzle temperature was set at 40 °C.

Nature

The result of the study also indicates that nozzle temperature and injection rate can significantly affect the above two aspects.

Materials & Design

An L9 orthogonal array is used with three factor levels for nozzle temperature, mold temperature, packing time and injection speed.

Materials & Design

A significant interaction between the nozzle type and nozzle temperature factors was found, that cannot be enlightened by the one-factor-at-a-time route.

The Journal of Supercritical Fluids

The lowest particle size was seen in sample with nozzle temperature at 60 °C and the extraction temperature at 90 °C.

Powder Technology

Reducing injector nozzle temperature by methods such as designing special injector cooling passages, and improving engine design are also proven to be helpful in reducing injector fouling.

Progress in Energy and Combustion Science

Human-verified similar examples from authoritative sources

Similar Expressions

39 human-written examples

The measured flow rates were in excellent agreement with those predicted by a simple effusive flow model for nozzle temperatures above 20 K, but were systematically lower for both sub-critical and super-critical jets as the temperature was lowered.

Cryogenics

Additionally, nozzle inlet temperature with high subcooling degree is preferred in the periodic mode.

International Journal of Heat and Mass Transfer

Revolving the scheme, a small-scaled experimental prototype was designed and established, upon which thermal tests were conducted to estimate influence of several parameters such as environmental pressure, nozzle inlet temperature and spray volumetric flow rate upon the cooling performance.

International Journal of Heat and Mass Transfer

Supersonic steam was injected inside the subcooled water at inlet pressure varying from 1.5 bar to 3.0 bar by using a specially designed supersonic nozzle, whereas temperature of water inside the vessel was raised from 30 °C to 60 °C at an increment of 50 each.

International Journal of Heat and Mass Transfer

Experimental studies have shown that for a 12 mm diameter straight vortex tube with six conical nozzles, maximum temperature difference of ≈109 K between hot and cold end flows was obtained for length to diameter ratio (L/D) > 25 and with optimum cold end diameter (dc) of 7 mm.

Proceedings of the Twentieth International Cryogenic Engineering Conference (ICEC20)

Expert writing Tips

Best practice

When discussing manufacturing processes, clearly specify the "nozzle temperature" and its impact on the final product's properties. Be precise with units (°C or K).

Common error

Avoid ambiguity by always stating the units of measurement (e.g., Celsius, Kelvin) when specifying the "nozzle temperature". Failing to do so can lead to significant misinterpretations and errors.

Linguistic Context

The phrase "nozzle temperature" primarily functions as a noun phrase, typically used as a subject or object in sentences describing thermal properties and processes. As Ludwig AI highlights, it's used within contexts related to engineering and scientific experimentation.

Expression frequency: Uncommon

Frequent in

Science

80%

News & Media

10%

Formal & Business

10%

Less common in

Encyclopedias

0%

Wiki

0%

Reference

0%

Ludwig's WRAP-UP

The phrase "nozzle temperature" is a noun phrase used to denote the temperature of a nozzle, primarily in scientific and technical contexts. As Ludwig AI confirms, the phrase is grammatically correct and frequently appears in engineering and thermodynamics discussions. Usage patterns show it's most common in science-related publications and reports. When writing about processes affected by temperature, specify the units (Celsius or Kelvin) to ensure clarity. You can also use related phrases like "jet temperature" or "exit temperature" depending on the nuance required. Therefore, while generally correct, be aware of the context and specificity required for technical discussions.

More alternative expressions

Phrases that express similar concepts, ordered by semantic similarity:

jet temperature

Focuses on the temperature of the jet or stream exiting the nozzle, rather than the nozzle itself.

nozzle thermal condition

Broader term that encompasses not just temperature, but also other thermal aspects.

nozzle heat level

Refers to the intensity of heat present in the nozzle.

tip temperature

Specifies the temperature at the very end of the nozzle.

spray temperature

Emphasizes the temperature of the spray produced by the nozzle.

exit temperature

Indicates the temperature at the point where the material exits the nozzle.

working temperature of the nozzle

Highlights the temperature during the nozzle's operation.

injection temperature

Used when the nozzle is part of an injection system.

dispensing temperature

Relevant when the nozzle is used for dispensing materials.

thermal state of the nozzle

General term that refers to the overall thermal condition.

FAQs

How does "nozzle temperature" affect 3D printing?

In 3D printing, "nozzle temperature" significantly influences material flow, layer adhesion, and the final product's mechanical properties. Higher temperatures can improve layer bonding but may also cause warping or deformation.

What is the optimal "nozzle temperature" for FDM printing?

The optimal "nozzle temperature" for Fused Deposition Modeling (FDM) printing varies depending on the filament material. PLA typically requires lower temperatures (180-220°C) than ABS (220-250°C).

What happens if the "nozzle temperature" is too low?

If the "nozzle temperature" is too low, the extruded material may not properly adhere to the previous layer, leading to weak or delaminated prints. It can also cause nozzle clogging.

Are there alternatives to using the term "nozzle temperature"?

Yes, depending on the context, you can use alternatives such as "jet temperature" or "exit temperature" to describe the thermal conditions near the nozzle.