Sentence examples for nozzle speed from inspiring English sources

Nozzle speed at each target point was compensated based on the corresponding crater depth.

For the practical engineering usage, the spraying temperature and nozzle speed should be adjusted synchronously based on Froude number.

Therefore, cold spray with the spiral trajectory and adapted nozzle speed is an effective way to repair damage components.

According to the simulated result, higher nozzle speed and proper spraying temperature which results in a lager Froude number can achieve better heating effect by taking two previous indices as evaluation criterion.

In this direction, our current work targets to analyse tensile bond strength of 3D printed geopolymer mortar with respect to printing time gap between layers, nozzle speed and nozzle standoff distance.

The optimization tests for the parameters printing speed, printing nozzle temperature and infill percentage, showed that the best parameters for 3D printing accurate and transparent AAA using the Ninjatek Cheetah Water TPU filament were 30 mm/s printing nozzle speed, 255 °C printing nozzle temperature, and 100% infill (Table 4).

Phase III involved investigating the differences in nozzle transverse speeds and surface speeds between disk- and rod (4.5 mm in diameter -shaped substrates for plasma HA spraying.

The effects of nozzle gas speed on the radiant tube were compared.

The effects of nozzle traverse speed on the coating surface temperature as well as coating thickness in cold spray were also investigated.

It is shown that at low nozzle traverse speed the tracks have triangular-like profiles and powder deposition efficiency significantly depends on the triangle height.

The laser power model, which is derived based on energy balance of one deposition layer, reveals the relationship between laser power and other process conditions, such as powder flow rate, nozzle travel speed and physical properties of deposited material.