Exact(4)
"Bill would put the pump nozzle between his fingers, and the tighter he squeezed, the higher the sound," Mr. Henderson said.
The relative position of the pressure sensor to the nozzle was changed as heights of 5, 10, and 15 mm and distances from the point just under the nozzle between 0 to 5 mm in 1-mm increments.
The Mono S column was attached to the nozzle between valves V2 and V3 when V2 and V3 were in position 2. The alarm monitors were set to a limit of 3.2 MPa and enabled.
Drill a 1 inch (2.5 cm) hole (or the size of the nozzle) between each stud at the top of each story of the house that you are insulating.
Similar(56)
A solution of 7 wt% PEO was electrospun varying the number of nozzles between 2 and 16.
The experimental studies showed that treatment with nozzle angle between 30° and 75° gives the surfaces with similar regular variation.
A typical exit diameter of a cold spray axisymmetric nozzle ranges between 5 and 10 mm that determines the spatial resolution of cold spray.
With nozzle diameters between 0.4 and 0.6 mm, extraction efficiency is estimated from 0.77 to 0.96 at the falling height of 0.5 m, with flow rate between 0.2 and 1.0 kg/s.
Here, we investigated the dynamic behaviors of flames and ionic wind in the presence of direct current (DC) and alternating current (AC) electric fields in nonpremixed and premixed jet flames with a jet nozzle placed between two parallel electrodes.
In order to provide a theoretical guidance for pulse-jet cartridge filters design, the optimized relationship between jet distance (the distance between nozzle and cartridge opening) and nozzle diameter was investigated in a semi industrial pulse-jet cartridge filter, using peak pulse pressure as an index to evaluate the cleaning effect.
At the micro level, fluid converge is the process of the diffuser and the nozzles transforming between each other during suction stage and discharge stage in a single cycle.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com