Sentence examples for noticeable oscillations from inspiring English sources

An overly small static droop coefficient is likely lead to WTG instability, while an overly large coefficient tends to induce noticeable oscillations in active power output during frequency recovery [4].

Figure 7B shows that [ATP]c is maintained at an almost constant level (~9.66 mM) without noticeable oscillations over the whole range of cardiac workload in the control system; in the no-CK system [ATP]c oscillates over a wider range (~± 0.2 mM at the maximum workload), and the average [ATP]c decreases from ~9.66 mM at the baseline workload to ~9.52 mM at the maximum workload in the no-CK system.

The model's synchronized inferior olive output was too small to induce noticeable ocular oscillations, requiring amplification by the cerebellar cortex.

In this paper, we are not interested in the exact nature of this process, but we mention here that a large number of spikes will also be accompanied by a noticeable reduction in oscillation amplitudes.

At low temperature (2 and 5 K), conductance oscillations are noticeable for gate voltages of − 37.4 V < V G  < 25 V and may be caused by Fabry Perot interference [19].

The obtained results reveal that this control methodology can play a noticeable role toward confining the oscillations of the considered structure when exposed to blast loadings.

We observed strong 5 12 Hz theta oscillations during DM, noticeable both in the raw signal and by time frequency wavelet analysis (for a representative trial, see Fig. 3A).

The bifurcation diagram in Figure 3B is quite similar to that in Figure 3A, the most noticeable difference being that the oscillation amplitude is smaller.

Furthermore, a closer analysis reveals that for short inter-pore distance, a minor but noticeable discrepancy in the amplitude of the oscillations appears in the visible range, in particular between the measured reflectance and the EMA-TMM values.

Results reveal that stiffness of the plate increases due to the viscoelastic nature of the materials and the relaxation effects are noticeable only after a remarkable number of oscillations following the impact.

It is noticeable that by increasing laser pulse intensity, the oscillations of the effective permittivity become highly peaked and the wavelength of these oscillations is decreased.