Calcium sensitivity of developed tension, visualized as the normalized tension-calcium relationships in Figure 2A, were indistinguishable between the HG and nonHG strips at all pCa conditions.
The relationship between normalized surface tension and channel aspect ratio, approximated for cases in which h/2R is negligibly small, is plotted as an inset in Figure 3. Figure 3 Normalized surface tension required for flow of liquid metal.
Inset: approximate normalized surface tension required for flow as a function of channel aspect ratio h/w.
When the normalized sheet tension approaches 1, this parameter rapidly decreases, and significant anticlastic deflection is retained after unloading.
Last, the effect of offset distance on the normalized reinforcement tension summation coefficient, KT, indicates that single and independent wall models yielded a single consistent KT value.
Minimum normalized surface tension required to initiate flow for liquid-metal in a cylindrical reservoir into a channel of a given height and width.
Figure 3 shows this normalized surface tension plotted as a function of channel geometry for a reservoir radius of 5 mm.
At the threshold point, these pressures are equal, and so by combining (7) and (8) we can determine the normalized surface tension at which flow is induced: widehat{gamma}=frac{gamma_1}{gamma_{t=0}}=frac{wleft(h+2Rright)}{2Rleft(h+wright)}.
The NO donor normalized mucosal oxygen tension, but improved serosal oxygen tension only when given along with fluids-suggesting that NO along with appropriate resuscitation can redistribute, and thereby improve, splanchnic microvascular perfusion [ 53].
Fatigue data of FU2590 measured with both methods are comparable when presented vs. the normalized maximum stress, i.e. maximum tension stress of a cycle divided by the bending or tensile strength, respectively.
