Sentence examples for nominal wall thickness from inspiring English sources

To validate numerical predictions, thirteen nominally identical laboratory scale cones with 26.56° semi-vertex angle and 3 mm nominal wall thickness with integral top and bottom flanges were CNC machined from 252 mm diameter mild steel billet.

The target chamber is a welded sphere made of aluminum alloy 5052 and has an inner diameter of 6 m and a nominal wall thickness of 8 cm.

The square tube in each CFTST column connection was fabricated by seam welding four pieces of lipped angle with nominal wall thickness 1.5 mm or 3 mm together.

The cold-formed square tube in each CFTST column connection was fabricated by seam welding together four pieces of lipped angle with nominal wall thickness 1.5 mm or 3 mm.

The specimens utilized in this experimental investigation were tubes of lengths 200 and 300 mm with a nominal wall thickness of 3.175 and an external diameter of 50.8 mm.

The strength design of heat-transfer surfaces composed of transverse finning tubes, in general, refers to the determination of the allowable wall thickness of the finned tubes, corresponding to the operating conditions and the selected material, and its comparison with the nominal wall thickness, assumed beforehand in constructive characteristics of the heat-transfer surface.

Wall thickness (Wall Thick): Wall thickness is described as the thickness of the fiber in the secondary wall [ 51].

All solutions were loaded in type 0500 glass capillaries (Hilgenberg, Germany) with nominal diameter of 1 mm and wall thickness of 10 μm.

Three sets of four nominally identical circular hollow sections (1.2 m long, nominal 76.1 mm internal diameter and 15 mm wall thickness) were manufactured from Hoop pine (Araucaria cunninghamii) veneers.

G-1 administration attenuated wall thickness and myocyte hypertrophy, with nominal effects on blood pressure, LV systolic function, LV compliance and cardiac fibrosis in the HS group.

Studies are carried on for IN718/Na, C-103/Na and T-111/Li compatible material combinations of heat pipe under nominal operations and a central heat pipe failure cases, and the influence of wall thickness on the design robustness is also investigated.