Sentence examples for nominal tensile from inspiring English sources

The prestressing tendons had a nominal tensile strength of 1,862 MPa.

The values indicate the maximum compressive force divided by the nominal tensile strength of strands.

Table 3 Results of maximum loads in load transfer tests normailized by nominal tensile strengths of strands.

The nominal tensile strength of the seven-wire strand used in the pull-out tests was 1820 MPa.

The prestressing level in the plates was 32% of their nominal tensile strength.

It is observed that the size effect on nominal tensile strength decreases with increasing material ductility.

According to Fig. 4, (V_{text{story shear}}) is the shear of the story at level i for an equivalent one-bay frame; P y and P cr are, respectively, the nominal axial tensile and compressive strength of braces.

As Kt becomes smaller, the notch strength ratio (NSR, which is the ratio of nominal ultimate tensile strength (UTS) of the notched sample to UTS of the unnotched sample) increases.

However, the stresses in the unbonded CFRP tendons at ultimate loading conditions of the tested beams were low, ranging from only about 66% to 72% of the nominal breaking tensile strength.

In 'classical' rock mechanics (e.g. Secor 1965; Jaeger and Cook 1979; Sibson 2000), the composite Griffith Coulomb failure curve for intact rock in τ/σ n′ space can be normalized to nominal rock tensile strength, T o (half the cohesive strength).

The results showed that the increase of graphite content in the specimens led to an enhanced non-linear fracture behavior, a reduced nominal notch tensile strength (σNT), and a higher specific fracture energy (Gf), characteristic length (lch) and thermal shock resistance parameter (Rst).