Sentence examples for nominal pore size from inspiring English sources

A single cartridge filter with nominal pore size of 5 μ was used (Fig. 1).

[32] After purging, a 50 milliliter (ml) filtered [0.45 micrometer (μm) nominal pore size] sample was collected.

However, the filterability highly depended on the rainwater sources, nominal pore size of filter, filtration conditions, and operation mode.

The ceramic tubular membrane (nominal pore size of 0.8 μm) is operated in an inside-out geometry.

The membranes are polyethersulfone flat sheets (NADIR P-150F) ultrafiltration membranes with nominal pore size of 0.038 μm arranged in circular fashion.

Commercially available AAO, Anodisc™ (nominal pore size 20 nm, Whatman, Maidstone, Kent, UK), which is about 60-μm thick, was used as an electrodeposition template.

The original nominal pore sizes of the membranes were 4, 20, 100, 500 and 1400 nm.

Fu et al. [45] have developed a slightly different approach based on porous anodic aluminum oxide (AAO) template with nominal pore sizes from 20 to 200 nm.

The system was installed in five dental operatories utilizing filter elements with nominal pore sizes of 50μm, 15μm, 1μm, 0.5μm, or with no system installed (control).

Increasing ionic strength tended to enhance the effect of adsorption of high-mass cationic polymers on the outer surfaces, but produced only a relatively small effect on streaming potential related to their permeation into silica gel (nominal pore sizes of 6 nm or 30 nm).

In this work, arrays of nanorods were formed on Pt-based BMG substrates via thermoplastic forming of Pt57.5Cu14.7Ni5.3P22.5 using alumina templates with nominal pore sizes ranging from 55 to 200 nm, termed "BMG-55", "BMG-100", "BMG-150", and "BMG-200", respectively.