Several developments are required in order to implement such a new system: development of a new family of network interfacing modules, implementation of a group of new smart wired and wireless sensors, implementation of a software application for configuring the sensor network, acquiring, visualizing and archiving data from sensors.
GOBO is designed in three modules; a data set module, a web interface module, and a data processing module (Figure 1).
Based on IEEE 1451 standard, the IP Power Sensor is composed of smart transducer interface module (STIM) and network capable application processor (NCAP).
To make the same underlying transport environment as IP network, we configure and modify the interface module of physical layer and data link layer in ndnSIM 2.0 [22], so the experimental results are more comparable and persuasive.
This approach allows supporting the ten signal lines of the 10-wire IEEE 1451.2 Transducer Independent Interface (TII), that connects the network processor to the Smart Transducer Interface Module (STIM) also defined in the IEEE 1451.2 standard.
In this case, the Link Usage might favor the use of other links over this one, in order to mitigate additional high data costs for this provider, or the Link Usage might command the Network Interface to use another Subscriber Identity Module (SIM) card of the same NOP.
The framework includes a ZigBee end device (sMPWiNodeZ), as an IEEE 1451 WTIM (Wireless Transducer Interface Module), and an IEEE 1451 NCAP (Network Capable Application Processor) that acts as gateway to an information service provider and WSN Wireless Sensor Networkk) coordinator.
One computer received the images from the scanner directly after reconstruction via the local network using a TCP/IP protocol and the Philips DRIN (Direct Reconstruction INterface) module.
The case study of a smart transducer network design in form of automated configuration and data exchange between ARM-based smart transducer interface module, central server and dislocated virtual transducer is presented.
Thus, the ISAC module ensures that (i) all service requests are handled equally irrespective of the employed network interface and that (ii) there is always adequate backhaul capacity to handle all the admitted service calls with their respective QoS requirements.
There were some STIM [Smart Transducer Interface Module] temperatures.
