Sentence examples for net tension from inspiring English sources

Groth added that lower levels of net tension on grass and indoor courts would make the ball more likely to dribble over.

Consequently, with the relevant electrochemical distortion of the aluminium plate, the final failure for net tension occurs prematurely with very low load values.

Net tension failure had a brittle and catastrophic nature, while rivet pull-out presented a more desirable slow ductile failure mode.

Among joint configurations where the lower sheet is 1.5 mm thick, the presence of (circular or radial) cracks on the bottom of the rivet, generated during the manufacturing procedure, gives rise to failure mechanisms such as shear out or net tension (Calabrese et al. 2013; Li et al. 2012; Han et al. 2007).

The depth h w of the web concrete is defined as the net tension zone depth of the wall cross section, which is calculated by subtracting the compression zone depths subjected to the positive and negative moments from the overall wall depth (see Fig. 2c).

However, under shaking more intense than design basis, the properties of the lead cores in lead rubber bearings may degrade due to heating associated with energy dissipation, some bearings in an isolation system may experience net tension, and the compression and tension stiffness may be affected by the lateral displacement of the isolation system.

But Gimelstob sees a problem in that different tournaments have different net tensions.

A significant portion of the drag-generated, netting tension of the W trawl is directed away from the wings to centre-line bracing ropes that are connected to a central towing wire through an intermediary sled.

Failure morphology under fatigue condition revealed net-tension, and shear-out failures besides the bearing damages.

Failure morphology under static conditions shows net-tension beside the bearing damage.

The effect of the bypass stresses on the joint net-tension strength has been studied.