Sentence examples for negligible diffusion from inspiring English sources

The EF value of 16 (lower than soluble) indicated that there was negligible diffusion of substrate and product removal from the gel-entrapped laccases.

The measured diffusion rates are comparable to those in bulk water along the pores, but with negligible diffusion between pores.

The dead time corresponds to the period of negligible diffusion of silver into glass and formation of a stable oxide layer.

The twin faults are dramatically suppressed and even completely eliminated in the NW branch after kinking, which is attributed to a stable In supply with a negligible diffusion effect.

Note that the parameterized state model of (6) can be viewed as a random walk model by incorporating negligible diffusion, i.e., D=ε I, where ε≪1 and no advection, i.e., w t =0.

The optimum gate overlap is quite small, or may even be negative, making a process without the need of high-tilt implantation feasible, even for dopant activation with negligible diffusion by flash annealing or laser thermal processing.

In regions of non-negligible diffusion control, values of the tortuosity are in the same range as the experimentally determined tortuosities.

However, in these reports [18, 19], the high temperature annealing (1000 °C) and thin high-k films (approximately 4 nm) may lead to the non-negligible diffusion of inserted layer material to the high-k/Si interface and result in VFB shift.

The variation in fraction liquid and liquid composition during the primary L→γ and eutectic type L→(γ+NbC) stages of solidification were calculated for conditions of negligible Nb diffusion and infinitely fast C diffusion in the solid phase.

To improve the pore size, laser irradiation with femtosecond pulses (i.e., negligible heat diffusion into the polymer material and confined excitation energy) is performed.

A grain boundary interdiffusion in a semi-infinite bicrystal under the conditions of negligible bulk diffusion is considered.