Sentence examples for nanocomposite density from inspiring English sources

Both nanocomposite density and CO2, CH4, N2, and H2 permeability were influenced by nanoparticle loading.

Nanocomposite densities were markedly lower than predicted by a two phase additive model.

In this work, nanocomposite low-density polyethylene films with carbon nanotube base were prepared by solution casting from boiling xylene.

We have performed a theoretical study of NO2 and O3 molecules on the TiO2/ZnO nanocomposites using density functional theory (DFT) calculations.

Hence, The LSV curve shows that the Pt(20%)/C has a better onset-potential than present electrocatalyst for HER but PMFMO@RGONF nanocomposite produces current density (j) of 300 mA cm−2 at overpotential of −721 mV (ɳ300 = −721 mV vs. Ag/AgCl)) which is smaller than Pt(20%)/C (ɳ300 = −802 mV).

The mixed powders were sintered according to the setting process (vacuum hot-pressing: 950 °C × 20 MPa × 2 h, hot isostatic pressing: 900 °C × 100 MPa × 2 h) to obtain the Cu-matrix nanocomposite [25].The relative densities of nanocomposite materials were analyzed by density measurement with liquid drainage based on Archimedes law (Table 3).

The low density nanocomposites showed high thermal stability and low thermal conductivity.

The decrease is mainly attributed to the nanocomposite scaffolds' lower relative density due to the agglomeration of additional MWCNTs, which have a lower density than the glass matrix.

A design of experiment (DOE) technique using the Taguchi method has been applied to optimize the affecting factors on the sonoelectrochemical synthesis of PPy-SiN nanocomposite such as current density, synthesis time and amount of nanoparticles.

The thermal stability of low density polycarbonate graphene nanocomposite foams prepared by supercritical carbon dioxide two-step foaming was investigated.

The discharge charge voltage profiles of the NiFe2O4/EG nanocomposite at a current density of 0.1 A g−1 are shown in Fig. 5a.