Sentence examples for msec were applied from inspiring English sources

EOG correction (Gratton et al. 1983), artifact rejection (± 100 μV), and baseline correction (100 msec) were applied.

A normalised collision energy of 35%, an activation of q = 0.25, and activation time of 30 msec were applied in MS/MS acquisition.

Condensation acoustic clicks, 0.01 msec, were applied with a distance of 12 inches from the subject at a sound level of less than or equal to 80 dB SPL in one ear with the contralateral ear plugged.

2-PE was identified with gas chromatography mass spectrometry (GC-MS; Agilent 6890 N GC and 5975 inert MSD) using a pulsed pressure injection of 1 μl onto an Innowax-101025 column (30 m × 0.25 mm, 0.25 μm film thickness), ion source (EI) ionization, and a dwell time of 40 msec were applied for each characteristic ion.

A raised cosine ramp of 6 msec was applied to the onsets and offsets of the square wave to prevent spectral splatter.

Sweeps were averaged together every 2 min. In experiments where paired-pulse facilitation was measured, two stimuli administered 50 msec apart were applied every 10 min while monitoring synaptic efficacy.

The protocol contained 3 mm T2 turbo spin echo sequences (TR 3070 msec, TE 107 msec, Matrix 256×192, FOV 250 mm). 3 mm proton density sequences (TR 3070 msec, TE 18 msec, Matrix 256×192, FOV 250 mm) were applied to determine the MS lesion load by using axial sections.

The following parameters and sequences were applied: a T1-weighted fat suppressed 3D gradient recall acquisition in the steady state; flip angle 55 degrees; repetition time 58 msec; echo time 12 msec; field of view 16 cm; 60 partitions; 512 × 512 matrix; one acquisition time 11 minutes 56 seconds.

At fixed intervals of 1 min a transepithelial bipolar current pulse (I) of 1 µA amplitude and 200 msec duration was applied to the tissue and the RT was automatically calculated from the change in open-circuit voltage (ΔVT) according to Ohm's law (RT = ΔVT/I).

Cells were held at a holding potential of −80 mV before a step protocol of 25 msec or 50 msec to different voltages was applied to determine the current-voltage relationship.

A sequence of seven radiofrequency pulses of 500 msec, called neuropsychophysical optimization, was applied by touching the metallic tip of the REAC probe onto seven reflex auricular points.