Your English writing platform
Discover LudwigExact(47)
WAXD and SAXS images were obtained up to 2.0 ms when the structure was mainly developed.
The calculation only takes 100 ms when the taxi count is close to 10,000.
The ignition delay time was shortened from 3.06 ms to 0.77 ms when the discharge was introduced at the ignition delay stage.
The average time required for solving an instance of NRP is only 0.80592 ms when the test environment is configured as: Apple A6, 1.00 GHz; 1 GB memory.
For the NR tested, the obtained characteristic time is around 20 ms when the material average elongation during the cyclic test is above a critical elongation value λc.
Taking Australia code as an example, the guideline requires wind turbines to stay connected for 60 ms when the PCC voltage soars to 1.3 pu.
Similar(13)
Additionally, no breakthrough was detected by the PTR-MS when the reactor off-gas was passed through the platinum catalyst, beyond decreasing system memory effects.
Each trial began with illumination of a central fixation spot for 1000 ms. When the fixation light was extinguished, targets appeared either immediately (overlap condition) or after a 200-ms gap (gap condition, horizontal 10° trials only).
Figure 1c shows an example of a cell recorded with different ISIs (150, 450 and 1000 ms, tested in randomly interleaved trials) and a cue duration of 30 ms. When the ISI was 150 ms (Fig. 1c left), the cell had a strong and long discharge starting immediately after the cue onset.
Following eye fixation on a fixation spot (0.5° in diameter) at the center of the screen for 900 ms, the first stimulus appeared for 800 ms. After a blank period of 500 ms only with the fixation spot, a second stimulus appeared for 800 ms. When the second stimulus was identical to the first stimulus, the monkey had to release the lever ('AA trials').
Each MAG measures the packet arrival rate at every 50 ms. When the number of measurements reaches 20 times by the MAG, the MAG calculates the ( bar lambda ) using the weighted average method as depicted in Eq. (1).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com