Sentence examples for ms per transition from inspiring English sources

Dynamic SRM method setup was used with a dwell time of 200 ms per transition.

The dwell time was set at 200 ms per transition.

Cycle-times ranged from 2 to 4.1 s allowing for a minimal dwell time of 18.5 ms per transition.

The q ij form an m × m transition matrix, Q, for the collapsed states.

For unscheduled runs a 10 ms acquisition time was used per transition.

Minimal dwell time per transition was 26.6 ms and maximal was 459 ms.

The dwell time per transition was 90 ms.

Dwell time per transition ranged from a minimum of 16 ms to a maximum of 459 ms.

Cells were lysed in M-PER (Pierce).

Thus, at the given time-resolution of 100 ms per frame, the early steps of the transition are not detected: the salt-binding (nanosecond scale), the adhesion of the membranes, and finally the initial part of the conversion to the H2 phase are obscured.

Table 2 Recovery capability of LDBOGM   L m =5 L m =5 L m =10 L m =10   PER =1 % PER =5 % PER =1 % PER =5 % Max.