Sentence examples for ms per pixel from inspiring English sources

A pixel size of 100 nm was used with a typical integration time of 10 ms per pixel.

The beam diameter was set to13 pixels, and the bleach time was 7 ms per pixel.

The higher sensitivity of spectral imaging results in discrimination between the two components at relatively short pixel dwell times of 2 ms per pixel compared to 11 to 17 ms per pixel [ 9– 12] in FLIM studies.

However, the fitting is slow, about 120 ms per pixel, or 8.7 hr to analyze 262,144 (512x512) pixels.

In our experiments, the exposure time was limited to 2.1 ms per pixel and employed excitation powers of less than 5 mW.

The FLIM image was captured with 512 × 512 pixel resolution at 0.8 ms per pixel dwell time (~7 min per image).

The spatial resolution is 1.3 m per pixel.

It contains 242 bands covering the 400 2500 nm with a spatial resolution of 30 m per pixel.

This image contains 220 bands ranging from 0.4 to 2.5 μm with a spatial resolution of 20 m per pixel.

Note that the lower values of SSIM for the GLP and AW methods are due to the ratio between band 4, which has a spatial resolution of 20 m per pixel, and the PAN image, which covers 5 m per pixel, while the three first bands have a spatial resolution of 10 m per pixel.

With a ground sample distance (GSD) of less than 2 m per pixel, roads can be broadly described as elongated regions.