Sentence examples for moving the optical from inspiring English sources
Servo control has the important role of moving the optical pick to a track and regulating it to read and write data along the track.
Finally, we discuss advantages of moving the optical trap such that it applies a constant force (force clamping), detection limits, the importance of high temporal resolution, data analysis, and potential sources of experimental artifacts.
Future modifications would include additional motors on lenses controlling the optical trap to enable additional flexibility of moving the optical trap in addition to the sample stage as well as moving the trap axially during z-stack acquisition.
The chamber design allows rapid exchange of buffer conditions by moving the optical traps across the stream interface.
The temporal resolution could not be further increased due to the time required for physically moving the optical components in the instrument to acquire the different channels.
All operations involved in the measurement were automated, that are: i) moving the optical inhomogeneity using a translating stage; ii) adjusting the gate delay; iii) rotating the circular variable attenuator to reduce injected power at early delays; iv) setting the intensifier gain; v) acquiring and saving the images.
The SIM was shifted to move the optical axis to ∼ 1′ from the edge of the S3 detector furthest from the frame store; a Y-offset moved the image ∼ 1′ into node 0 of the detector.
These image stabilization systems are categorized into two types according to the approach that is applied: the lens-shift approach, which shifts a floating lens to move the optical axis [11, 12] and the sensor-shift approach, which shifts the image sensor [13].
Designers shifted the MacBook Pro's ports to the left side of the case, and moved the optical disc drive slot from the front to the right side, similar to the MacBook.
A linear motor is used to move the optical pick-up detection module in the horizontal plane.
The dynein-coated beads were captured with an optical trap and brought to the proximity of the MT. When the motors on the cargo bead attached to the MT and started to move, the optical trap was turned off.
