Then, the diamond indenter moves along the [00ī] direction (as shown in Figure 2a (2) and returns to its initial position (3)).
In this example, the concession of α in move 3 is used in move 4 (as shown by the brackets), but move 2 only uses half of the concession in move 1.
The piezometric map suggests that the direction of groundwater movement must be moving as shown in Fig. 4 from the east towards the center in one path and the other path is from the western part towards the center part.
As for the third card, the force balance is always maintained which can leads to the two possible cases as shown in Figure 4(b), where the one is that only the second card starts to move while the third card does not and the other is that both the third and the forth cards are moved as shown in the lower example of Figure 4(b).
The body was continuously moved as shown in pictures 2 to 7.
As expected, the transfer rate was slower while the client device was moving (as shown in Table 2B, section V).
Still the detected moving edges are scattered and deviate from the ground truth of the moving object as shown in Figure 1(i).
By moving the laser spot at increments of 100 nm starting from graphene edge and moving inward as shown in Supporting Information, Figure S1, we were able to capture the shift of the ω2D peak as a result of the uniaxial strain buildup along that region, which is not steep (see Figure 1).
As the tip moves forward, as shown in Figure 4c, the dopant atom drops gradually because of the decreasing vertical attraction from the tip.
Accordingly, for growing ε, the ACF bears higher sidelobe levels which would degrade the output SNR of moving MF, as shown in Figure 13.
