Sentence examples for mount the sample from inspiring English sources

The appearance of carbon peaks in the spectrum may attribute to the carbon tape used to mount the sample on the stub.

To avoid errors by characterization of tilted layers, we used an approach well described in [17]: we mount the sample in such a way that the direction of the miscut is perpendicular to the diffraction plane.

Distilled water was used to mount the sample to the sample holder, and the cryosectioning was performed without embedding medium.

All the tools used to mount the samples on sample holders were cleaned with an ethanol ultrasonic bath.

This setup could then be attached to customized tools to mount the samples into the servo hydraulic testing machine and the testing robot.

After mounting the sample inside a high-vacuum chamber, a H-containing gas mixture is introduced to generate instantaneously a given hydrogen partial pressure (pH2) inside the chamber.

The small peaks of Cu and C were the result of the carbon film on the Cu grid from mounting the sample.

The results shown here were obtained at low temperatures (20 K) by mounting the sample in a microscope cryostat for spatially resolved photoluminescence measurements (see Figure 1a).

Mounting the sample in the radiation-shielding enclosure containing the beamline elements, the hutch, may consume as much as the entire first day due to the extensive instrumentation involved.

Most technically challenging was mounting the sample, x-ray penetration through the sample and orientation of the fiber axis (some of which is random in leaf cells).

Mounting the sample into a pressed KBr opaque disk with the sample embedded was achieved but maintaining any control over fiber orientation was not.