Sentence examples for mould was designed from inspiring English sources

In order to solve this heterogeneity, a rotating mould was designed.

An instrumented injection mould was designed to determine the crystallization kinetics of semi-crystalline polymers and short fibre reinforced bulk composites.

To address this issue, a home-built instrumented mould was designed to measure and identify several properties from a single experiment.

The PvT-xT mould was designed for high performance thermoplastics: high temperature (up to 400 °C), high cooling rate (up to 200 K/min) and very high pressure (up to 200 MPa).

In order to produce sound ingot, a new 2. 8 t ingot mould was designed which includes some parameteric changes in mould such as mould slope, slenderness ratio, mould concavity radius, fillet radius of mould internal corners and feeding diameter to ingot upper diameter ratio.

In order to overcome the shortcomings, two types of non-uniform thickness mould are designed to obtain higher temperature gradient ahead of S/L interface and flat S/L interface, contributing to reducing or eliminating the solidification defects in the blades during direction solidification.

An optimum shape of a 3D CAD model of a typical component suitable for injection moulding was designed and the core and cavity tooling required to mould the part then generated.

Though there is significant experience with the general use of EVA during the injection-moulding process this knowledge has been gained through years of experience and moulds are designed by a combination of the producer's knowledge and trial and error.

Stainless steel and granite substrates moulds were designed and fabricated for this purpose.

Split metallic moulds were designed and adopted for easy demoulding after winding the lattice core.

The PDMS microfluidic moulds were designed and pre-fabricated from an SU-8 master with standard lithography methods [1].