Sentence examples for motion and displacement from inspiring English sources

Breaking location has a much greater effect than wave steepness on the magnitude of the mooring load, while significant influence of the body motion and displacement on the mooring load is demonstrated.

Evidence is provided that the use of individual focussed wave groups is inadequate to assess fully the extreme loads experienced by a taut moored WEC due to the demonstrated dependence of mooring load on the body׳s motion and displacement.

The piezo-driven compliant stage consists of compliant mechanisms for both motion guidance and displacement amplification, stack-type piezoelectric elements, and high-precision displacement sensors.

Compared with the single occupancy in a 512 cage, the enclosure of two CO molecules in a 51264 cage will increase the positional disorder and the scattering distributions (lower-symmetric position), which would in turn result in larger isotropic thermal motion (Uiso) and displacement of CO from the cage centre.

These challenges include motion artifacts and displacement tracking accuracy, as well as limited heating capability, which contributes to low thermal strain signal-to-noise ratio, and a limited field of view.

By this procedure, support motions and displacements of actuators between the bodies can be employed as an input to the system.

The data demonstrate that RF refocusing in the presence of flowing blood is possible, but the improvement in signal amplitude depends on the static magnetic field homogeneity along the direction of motion and the displacement of the spins between the excitation and the RF refocusing pulse, as well as displacement during subsequent RF refocusing pulses.

The coupled equations of fluid motion and pipe displacement are solved.

Synchronization occurs due to dependence of the periods of rotating elements motion and the displacement of the base on which these elements are mounted.

The model enables the size optimization of all particular elements of the Stirling device such as: heat exchangers, the regenerator, the cylinders, piston motion and phase displacement.

The rotational motion and translational displacement in the x direction can be decoupled by controlling the piezoelectric actuators in the x axis with the same displacement values in same and opposite motion directions, respectively.