Sentence examples for most severe load from inspiring English sources

To consider the most severe load condition, the axle load was placed at the corner of the slab.

Electromagnetic analysis of the ITER generic upper port plug was carried out to estimate the most severe load to which the in-vessel components would be subjected.

By means of a rainflow analysis procedure and the Palmgren Miner rule the most severe load cycles, largely contributing to the fatigue damage are identified and reproduced for a possible component test signal.

The wind turbine blade was able to sustain the loads in the first two tests, but the blade collapsed in the third test when the negative flapwise load reached 70% of the maximum target value, a value representing 50% of the most severe load in the first test.

In general, the acceleration-time records obtained attested an adequate structural responses of the footbridge, in terms of both vertical peak and root mean squared (RMS) acceleration values, even for the most severe load cases (deck loaded at 33% and crowded condition).

In other cases, the long-term loading is considered the most severe loading condition.

To avoid these consequences designs must address one of the most severe loading scenarios: the crushing of level ice sheets against a structure.

The tubesheet structure is one of the components that suffer the most severe loading in fast reactors, and it is one of the most difficult components to design because of such severe operation conditions and its complex three-dimensional structure with an arrangement of numerous penetration holes.

In the current design of the IFMIF, the free surface of the Li target is under a most severe heat load condition with respect to Li boiling.

Bearings experience one of the most severe mechanical loading of all machine elements.

However, even though the slab near the expansion joint experiences the most severe dynamic loading effect, the slab located near the expansion joint, which is rendered stronger by its deeper cross section, has a lower probability of fatigue failure than other panels.