Sentence examples for mortars were determined from inspiring English sources
In addition, the mixture ratio and laboratory preparation method for high-strength microbial mortars were determined.
The flow spreads of the mortars were determined using a standard flow mould and subsequently the relative flow areas were measured.
The flexural and compressive strengths of the mortars were determined and pozzolanic activity was calculated from the compressive strengths.
Compressive strength, flexural strength, water absorption and porosity of RHA and NS mortars were determined at various curing ages.
The compressive strength and porosity value of the cement mortars were determined after being exposed to high temperatures (400, 600 and 800 °C).
The impact of copper tailings at 0%, 5% and 10% addition level by mass of cement on the fresh and hardened properties of mortars were determined.
The pore structure of the developed mortars is determined by mercury intrusion porosimetry (MIP) and BET methods.
The influence of these polymers on the properties of cement pastes and mortars was determined using various characterization methods like mortar flow, rheological and calorimetric measurements, adsorption measurements and mortar compressive strength.
The flowing ability of the mortars was determined with respect to the flow spread at various dosages of a polycarboxylate based high-range water reducer (HRWR).
At the end of the 90-days period the compressive strength of the mortars was determined and the deterioration products were identified through means of X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and thermogravimetric analysis (DTG).
The chemical and physical characteristics of two restoration mortars are determined by laboratory testing.
