Sentence examples for morphology with roughness from inspiring English sources

Also during typical flight conditions, i.e., −12 °C and 0.5 bar, it retains its hierarchical superficial morphology with roughness features from nano- to micro-scale and shows contact angle higher than the commercial reference.

It also has the smoothest morphology with average roughness of 0.12 nm than the others' roughness of 0.39 and 7.2 nm, respectively.

The surface of the materials showed the formation of hierarchical surface morphology with high roughness created on the surface by the introduction of silica ormosil aerogel to the polymethylhydroxysiloxane. The synthesized silica ormosil aerogel and hybrid materials showed disordered meso structures.

Ongoing work in our lab aims to explore this method further by looking at additional metals and alloys as well as at the more complex morphologies with higher roughness factors, such as those produced by electrodeposition through self-assembled colloidal sphere masks.

Smooth surface morphology with a low roughness value below 5.0 nm was observed for the coatings under the hot pressing process.

Surface morphologies of the bare glass and silicon substrates and the substrates coated with gold were examined by AFM method, and the typical AFM images are shown in Figures 2 and 5. Bare Si surface exhibits flat morphology with low surface roughness not exceeding 0.2 nm.

Surface morphology of DLC films with roughness below 10 Å was observed under atomic force microscopy.

The S-5 min film was amorphous and homogeneous in morphology with a limited surface roughness.

TEM images combined with the corresponding diffraction patterns depicted that: a) The S-5 min film was amorphous and homogeneous in morphology with a limited surface roughness.

The AFM study of the grown films reveals that all the samples have grain-like surface morphology with an average surface roughness of about 4 5 nm.

All the samples have grain-like surface morphology with an average surface roughness ranging from 4 to 5 nm and an average grain size ranging from 13 to16 nm.