The phrase "more significant increase" is grammatically correct and can be used in written English.
It is typically used to describe an increase that is more noteworthy or substantial compared to previous increases. Example: "The company reported a more significant increase in sales this quarter compared to the previous year."
Total splice junction reads showed an even more significant increase.
But this is a much more significant increase than in the last few years".
Results: Volume produced a more significant increase in SVC flow than dopamine (+43%).
However, 200 1-h cycles at 1100 °C resulted in a more significant increase in surface roughness.
A more significant increase can be expected if it is cold enough to cause shivering, which warms the body through quick involuntary contractions and relaxations of muscles.
Especially, a more significant increase of crystallization rate for physical blend was present as comparison to PBS/SWCNT-APTES after hydrolysis due to the higher diffusion constant, which is attributed to the change of surface properties of nanotubes.
Whereas for more significant increase of bubble size, most of the BSA aggregates were produced in the rising foam and companied with enhanced foam drainage, they decreased both the recovery percentages of BSA overall and BSA monomer.
Dynamical mechanical thermal analysis (DMTA) showed a more significant increase in effective crosslink density (as measured from the plateau of the rubbery modulus) in the composites containing the reactive clays as compared to the unmodified clay, supporting the concept that the acrylate and methacrylate functionalities of the modified clays had reacted with the matrix.
Less reinforcement was observed with the epoxy-functionalized GO (GPTS-GO) but there was a more significant increase in ductility for GPTS-GO/epoxy, with the fracture toughness (critical intensity factor, KIC) and fracture energy (critical strain energy release rate, GIC) nearly doubling at 0.2 wt% loading (1.46 MPand/2 and 0.62 kJ/m2 for KIC and GIC, respectively).
A splitting tensile test showed that although using HA resulted in a more significant increase in the modulus of rupture of the samples when compared to CAC, mixing both (CAC+HA) had the most positive impact on the green mechanical properties of the castables, leading to strength levels as high as the reference cement-bonded system (CAC-Ref).
If inventories were included, it would show a more significant increase.
