Sentence examples for more homogeneous layer from inspiring English sources

As it does on the PC, he said, the browser could provide a more homogeneous "layer" for programmers.

Thanks to this system, the deposited clad height can be regulated depending on the process parameters, what allows obtaining a more homogeneous layer height and results in a more stable process.

When the ageing method includes water jets, the top superficial layers made from the inorganic filler and the organic products from the PVC degradation are removed and leave behind a much more homogeneous layer which is more resistant to ageing than the "as processed" one that contains defects introduced by the calendering process.

Since spin coating gave more homogeneous layers, it was continued to be used.

For formation of homogeneous layers of PEI, both dip coating and spin coating techniques had been tried (the latter was further used since it gave more homogeneous layers).

For formation of homogeneous layers of PEI, both drop coating and spin coating techniques have been tried since spin coating gave more homogeneous layers, it was continued to be used.

This difference, thus, seems to affect the surface gold concentration; the higher the surface concentration, the more homogeneous the layer is.

At 15:00 h, the wind persistence ratio ranged from 0.2 to 0.86 under the lowest 5000 meters of the troposphere, although a clearly more homogeneous mixing layer was observed).

The same mechanism also gives rise to the more homogeneous lower (InGaAs) layer which, being lower in energy than and adjacent to the second WL, can effectively compete for carriers and possibly explains the decrease in WL intensity and the increase in QD intensity after 120-min annealing seen in Figure 4b.

As IPCs are an acquired progenitor group during cortical evolution, it suggests that the expansion of the cortex has been more homogeneous among all layers than previously thought (Tarabykin et al. 2001).

The higher quality intermediate phase layer resulted in more highly crystalline and more homogeneous CH3NH3PbI3 perovskite capping layer atop the mp-TiO2 after the heat treatment at 100 °C, which caused the lower series resistance, higher shunt resistance, and better photovoltaic performance in the PSC (Fig. 3; Table 1).