Sentence examples for more desirable mode from inspiring English sources

Based on the test results, it is more advantageous to design the coupling beams as shear-yielding members since a shear-critical coupling beam exhibits a more desirable mode of energy dissipation than a flexure-critical coupling beam.

The test results indicate that it is more advantageous to design the coupling beams as shear yielding members since the shear-critical coupling beam exhibits a more desirable mode of energy dissipation than the flexure-critical coupling beam.

If diffusion is considerably hindered, one expects active transport to become a more desirable mode of transport.

As well as providing the more desirable backward mode configuration in which the PA waves are detected on the same side of the tissue that the excitation light is incident, the use of optical scanning provides high acquisition speed with a reported single A-line acquisition time of 0.04 ms [ 23].

Design procedures developed and proposed and currently used in design of single plate connections are strength-based procedures that ensure occurrence of ductile and more desirable failure modes, such as yielding of the steel plate prior to occurrence of brittle and less desirable failure modes such as fracture of bolts and welds.

A relatively small value of ( rho_{pfb}^{U} /rho_{pfb}^{B} ) suggests that a beam prestressed with an unbonded tendon and its reinforcement ratio greater than the balanced ratio (( rho_{pf}^{U} ge rho_{pfb}^{B} )) would fail in a more desirable compression-controlled mode with sufficient safety.

Net tension failure had a brittle and catastrophic nature, while rivet pull-out presented a more desirable slow ductile failure mode.

The column-wall failure mode is more desirable than the beam-end (or beam-section) continuous failure mode under the column removal scenario due to the former's ability to develop an effective catenary mechanism to bridge over the member failure of the column itself.

Therefore, the effective separation of glycosylated-proteins/glycosylated-peptides combined with appropriate mass spectrometry fragmentation mode would facilitate more desirable identification result [ 1, 11].

Hence, enhanced mode (normally-off) AlGaN/GaN HEMTs have become more desirable because these offer simplified circuitry (eliminating the negative power supply), in combination with favourable operating conditions for device safety.

Yet slender is more desirable.