Sentence examples for monolithic layer from inspiring English sources

The bi-layer composites were prepared by co-pressing and co-sintering to obtain the monolithic layer between the two layers.

The fatigue crack growth resistance of a SiC fibre reinforced Ti6Al4V (wt%) composite plate that has been clad on each side with a monolithic layer of Ti6Al4V (wt%) has been assessed.

In turn, their share depends upon the longitudinal temperature gradient within the monolithic layer as determined by the heat generation in the inlet part due to propane combustion by oxygen, its transfer along the monolith layer and consumption in the rear part of the monolith in the absence of oxygen through endothermic reactions of dehydrogenation, cracking and steam reforming.

Monolithic layers were applied as platforms for microarrays to accomplish highly sensitive solid-phase protein analysis.

The coatings consisted of either Ti1 – xAlxN or TiN ceramic monolithic layers with a titanium bond coating layer as the interlayer between the ceramic coating and the ZIRLO™ substrate to improve coating adhesion.

An alternative arrangement of the fibrous and monolithic layers in hybrid laminates gives an average strength of up to 450 MPa, an apparent toughness of ∼11 MPa m1/2 and a fracture energy in excess of 2600 J/m2, with a non-catastrophic fracture behavior.

Composed using an audio library of cosmological activity collected by the Jet Propulsion Laboratory, NASA and private sources, the three long, free-floating works on the album use sound recordings of outer space to create monolithic layers of tones and textures.

Based on these findings, such nanolaminate material can easily replace monolithic SiO2 layer in interference stacks to enhance the tribological behavior of optical filters.

The hardness measured by nanoindentation showed almost the same hardness i.e. 9 10 GPa for the multilayer coatings while the monolithic TiN layer showed 13 GPa.

The corrosion resistance of the multilayer coatings improved in comparison to the monolithic TiN layer when studied in 3.5 wt% NaCl and Hank's solution.

Figure 8c is a higher magnification of bands C and B, with a eutectic (Ni3Ti + NiTi) in band B when a monolithic NiTi layer forms in band C. A more recent study by Chen et al. (2010) successfully joined Ti-6Al-4V and Inconel 718 (Special Metals Corp., New Hartford, NY, USA) using fiber laser welding.