Sentence examples for molding pressure from inspiring English sources

Results indicated that the bulk density and compressive strength and flexural strength increased with the molding pressure.

In order to seek optimum technical conditions, different molding pressure and heat treatment temperatures (HTT) were investigated.

A significant size effect was observed, manifesting itself in terms of significantly increasing characteristic molding pressure as the punch width decreases to 1.5 μm and below.

When molding thin light guide plates, high injection speed and high molding pressure are required to fill the mold completely, but it is easy to have parts with defects like high residual stress and high warpage.

The key finding is that, in what might reasonably be viewed as a fully-plastic state, the molding pressure normalized by the yield stress is equal to a constant plus a term that increases linearly with the depth of indentation.

XRD and mercury intrusion porosimetry after compression molding demonstrate that the molding pressure has mainly no effect on the hydration production and only has improvement on the structure of specimens.

However at lower molding pressures a coarse mosaic texture and many pores and cracks were found.

The low molding pressures allow relatively lightweight and inexpensive molds to be used, even when large items such as bumper assemblies or refrigerator doors are formed.

Due to its poor performance within thermosetting resins cured at high molding pressures, GFRP was not succeed in the first applications (Reinforcing Concrete Structures with Fibre Reinforced Polymers 2007).

The plate is designed for injection time, maximum mold pressure, stiffness and buckling.

Increase of the mold pressure increases the lateral extension of the inserted lamellae in the shell material.