Sentence examples for mold was placed from inspiring English sources

During compression, the mold was placed on a removable plate and the two pieces held together by a compression spring as shown in Fig. 2a.

The mold was placed on a glass slide and a Mylar strip and filled with the uncured samples, which were inserted in a single increment.

Then the mold was placed vertically in UV light (365 nm, SB-100P/F, Spectronics Corporation, USA) for 30 min to polymerize a BRI/PHEMA composite film.

Before submerging the cylindrical molds containing fresh HESC into the curing water, each mold was placed into a waterproof plastic bag, and the top surface was covered with a plastic sheet to prevent evaporation of the water in the mold.

The mold was placed in Styrofoam container, which holds dry ice/2-methyl butane slurry, and the block was allowed to freeze until the OCT becomes white and solid.

For this, the mold was placed together with a glass vial containing 10 μL of trichloroperfluorooctysilane (Sigma-Aldrich) into a desiccator and evacuated to a pressure below 10 mbar for at least 45 min until the silane evaporated completely.

In this process, an ingot mold is placed inside a cylindrical tank that is connected to vacuum pumps.

The mold is placed in a kiln, the wax melts away and the molten bronze can be poured inside.

The mold is placed in a powerful hydraulic press, and the mixture is compressed to the desired wheel size, allowing some oversize in dimensions for finishing operations.

Then, the mold were placed in vibrator and compacted.

These molds are placed in flat kilns, and the two layers of glass are placed on top of them.