Sentence examples for mold was filled from inspiring English sources

In this method, a topographically patterned hydrogel (mold) was filled with the secondary material (filler) via capillary force.

After the mold was filled with the mixture to about 10 mm high, the air bubbles were removed again for 10 min in the desiccator.

The interior components of the prevacuolar compartment were added in steps as the mold was filled, so that they were as close to their correct biological position as possible (Fig. 4a-d).

Since the compaction process can significantly affect the mechanical properties of porous concretes, the process was carefully controlled as follows: Half of the mold was filled with the mixture, and a tamping bar was used to compact the mixture 10 times.

The mold was filled and pressed by hand between two glass microscope slides to extrude any excess material.

The mold was filled with resin-composite with a bulk placement and light-cured for 60 s on each side using a light curing machine (3M Elipar Trilight, St . Paul MN, USA).

Finally, the mold is filled with bronze.

As the mold is filled, the electrode moves up.

Each time the mold is filled, and the sushi pressed out and sliced, six pieces that look like layered tea sandwiches are produced.

2. The mold is removed (in two or more sections) from the sculptured form, and the inside of the mold is filled with wax or coated with a layer of wax of the same thickness as that desired for the final casting.

In order to generate arrays of organic semiconductors, only recessed channels of the patterned PUA mold were filled with a TIPS-PEN or C60 ink solution using discontinuous dewetting [22].