Sentence examples for mold as shown from inspiring English sources

Normally, rimmed steel is cast into a big-end-down mold, as shown in B in the figure, for easier mold stripping and ingot handling.

The degassing process was applied to remove bubbles from the mixture before poured it into the mold as shown in Fig. 1 and cured for 24 h.

Because the new mold had a relatively high defect density, it was used as a prepattern for a second DSA process, this time with no densification, leading to a high quality final mold as shown in Fig. 3II [5].

Wooden pans were placed on top of the cast reinforced mortar layer and the sides of the forms were cast around the wooden pans in each vent of the steel mold as shown in Fig. 4c.

Wooden pans were placed on top of the cast reinforced mortar layer and the sides of the forms were cast around the wooden pans in each vent of the steel mold as shown in Fig. 4c.   3.

N R, which is 56, is the number of total molds, ( {R}_n^0 ) and ( {R}_n^1 ) respectively represent the black and white regions in the nth mold as shown in Fig. 2.

Then a polymer substrate is placed between the heating plates and the silicon mold insert, as shown in Figure 5.

Next, a wide range of nanohole depths in the range of approximately 200 to 420 nm can be quickly and reliably replicated simply by changing the mold temperature as shown in AFM measurements of Figure 4a,b,c,d.

The STL data for mold fabrication were derived as shown in Figure 2. To introduce a cortical bone-like structure, modified molds were also constructed with a gap of 0.5 mm between outer shell and lattice).

After removal of unsolidified resin by washing, β-TCP slurry was filled completely into the fabricated resin mold in the direction as shown in Figure 2. The scaffold samples were allowed to set at room temperature overnight for the silicone to cross-link completely.

Most specialty steel shops pour their alloy grades in big-end-up molds and use hot tops, as shown in C in the figure, in order to minimize the size of the cavity and consequent steel loss.