Sentence examples for molar flow from inspiring English sources
Molar flow rate (kmol/s).
Molar flow rate (mol/min).
Reaction rates were calculated from conversions, molar flow rates and mass of catalysts employed.
Experimentally determined minimum fluidization velocity allowed to select the necessary molar flow rate of substrates.
Exhaust molar flow rate on a dry basis was estimated based on M a and AFR.
The methods assume constant relative volatilities and constant molar flow rates within each distillation section.
The TEGa molar flow rate was fixed at 4.95 μmol/min, and the TMIn molar flow rate was set as 6.51, 10.75, 9.90, 13.44, and 17.68 μmol/min for sample A to E, respectively.
The actual operating conditions such as feed molar flow rate, temperature, and pressure have been tabulated in Table 1.
Figure 6 depicts the molar flow rate distribution of each component along the axial distance of the catalyst bed.
where FIN,1 is the molar flow rate of inlet process gases in the stream number.1 (kmol/h), FIN,2 is the molar flow rate of inlet air in the stream number 2 (kmol/h), FOUT is the molar flow rate of each gas from the combustion zone (kmol/h), Ftot is the total molar flow rate of outlet gases from the combustion zone (kmol/h).
The compressor was operated at 1.2 K and 3He molar flow rates of 130 μmol/s were achieved.
