Sentence examples for mol and a from inspiring English sources

The TAN removal followed first order kinetics, with Arrhenius parameters of activation energy 5.78 kcal/ mol and a pre-exponential factor 1.56 s− 1.

An ethanolic solution of 3-amino-2-methylquinazolin-4 3H -one 3-amino-2-methylquinazolin-4 3H -one 3-amino-2-methylquinazolin-4 3H -one 3-amino-2-methylquinazolin-4 3H -one 3-amino-2-methylquinazolin-4 3H -one 3-amino-2-methylquinazolin-4 3H -one 0.005

Highly crystalline single-phase VAPO-11 can be best prepared at 170°C from a synthesis gel with a low vanadium content (0.02 mol) and a high water content (25 mol).

In this study, F-18 labeled [R8,15,21, L]-VIP was produced with the radiochemical yield being as high as 33.6% ± 3% (decay-for-corrected, n = 5) achieved within 100 min, a specific activity of 255 GBq/ μ mol, and a radiochemical purity as high as 99% as characterized by radioactive HPLC, TLC, and SDS-Page radioautography.

A 5-gallon autoclave equipped with a stirrer, pot thermometer, and addition ports was charged with a premix of 1-decene (1616.5 g; 11.5 mol), trichlorosilane (4683.2 g; 34.6 mol), and a 50%% toluene solution of (tetradecyl tri- n-butylphosphonium chloride (679.7 g; 2.3 mol).

At this condition, the produced gases mainly consisted of hydrogen (59.5 mol%), methane (14.8 mol%) and carbon dioxide (22.0 mol%), and a small amount of carbon monoxide (1.6 mol%) and C2 C3 species (2.1 mol%).

In addition to the solvents, different precursor/solvent solution concentrations (0.125 mol% and 0.5 mol%) and a shield have been used to investigate film formation mechanisms.

However, the mcl-PHA composition is quite remarkable with a significant amount of 3-hydroxydecanoate (3HD 62 mol %), and a lower amount of 3-hydroxydodecenoate (3HDDe 12 mol %) and 3-hydroxydodecanoate (3HDD 7.6 mol %).

The dotted curves show contours of different Fo mol%, and a black solid curve is the best fit curve between the positions of DB1 and DB2 by Kuebler et al. (2006).

A slightly higher palladium loading (2 mol %) and a concentration of 1 m of the starting bromide maximised the reaction conversion for a range of nitriles that contained different functional groups (Table 3).

A sensitivity of 1.20 ± 0.04 dB/mol% and a detection limit of 0.0079 mol% have been determined for this sensing element.