Sentence examples for moisture correction from inspiring English sources

moisture correction factor.

Moisture correction factor was calculated using the following formula: mcf = frac{100 + MC ;}{100}where mcf moisture correction factor and MC soil moisture content.

However, the higher moisture of MS (mean 54.2%) vs DS (mean 9.6%) increased the calculated relative concentrations of PAHs in MS vs DS after moisture correction.

The percent contributions of individual PAHs to the total are unchanged by moisture correction, as the same conversion factor is used to change WWB to DWB for each PAH within an STP sample.

While DS and EPO results were similar when a large number of soil cores were reserved for calibrating the moisture correction methods, SOC predictions using the EPO correction significantly outperformed those using the DS correction for a lower number of cores (5 cores, 15 samples).

It consists of two steps; in the first step the GPI technique is applied to the Kalpana-IR data for rainfall estimation over the Indian land and oceanic region and in the second step an environmental moisture correction factor is applied to the GPI-based rainfall to estimate the final rainfall.

The objectives of this study are to investigate the value of Fickian diffusivity constant, moisture equilibrium content and correction factor for the natural fiber composites.

After correction for moisture, total PAH concentrations (Table 2 and Figure 4) were lowest for the HP products (210 ng/g DWB), and highest for the SP product (13,972 ng/g DWB).

STP acrylamide levels are reported in two ways, on an "as received" basis which we term "wet weight basis" (WWB), and also after correction for moisture content on a "dry weight basis" (DWB).

*All hydrazine concentrations are based on the "as sold" or wet weight of STP, with no corrections for moisture.

The present study focuses on the augmentation on GPI technique by incorporating a moisture factor for the environmental correction developed by Vicente et al. (1998).