Sentence examples for modulus were evaluated from inspiring English sources

Flexural strength and modulus were evaluated with the 3-point bend test.

From the nanoindentation curves, hardness and elastic modulus were evaluated from the tangential lines in the nanoindentation unloading curves.

The storage modulus and loss modulus were evaluated by Dynamic Mechanical Analysis (DMA).

The compressive strength and the elastic modulus were evaluated in accordance with ASTM C 39 (ASTM 2015) and ASTM C469 (ASTM 2014), and determined from standard cylindrical specimens of 100 mm in diameter and 200 mm in height.

The mechanical properties, i.e. hardness and elastic modulus were evaluated by nanoindentation, and the adhesion of the coatings was tested by scratch tests.

Various mechanical properties such as compressive strength, split tensile strength, flexural strength; ultrasonic pulse velocity (UPV) and elastic modulus were evaluated.

The modulus is evaluated in the first part of the stress-strain curve before reaching peak stress.

The modulus is evaluated in the first part of the stress-strain curve where it is fairly linear.

The elastic properties such as bulk modulus, Young's modulus are evaluated by Viogt Reuss Hill approximation.

The rapid freeze-thaw cycling tests were conducted and the relative dynamic modulus was evaluated up to 300 cycles.

Moreover the coatings loss modulus was evaluated on the basis of indentation creep measurements under room temperature.