Sentence examples for modulus strain from inspiring English sources
Experiments revealed that OPF formulation and crosslinking time may be adjusted to influence the equilibrium swelling ratio, elastic modulus, strain at fracture, and mesh size of these hydrogels.
Addition of compatibilizer increased tensile strength, flexural strength and flexural modulus, fatigue life and HDT while tensile modulus, strain at break and impact strength decreased.
We focus on glass-vinyl ester syntactic foams and perform a parametric study to elucidate the roles of strain rate, microoballoon density, and microballoon volume fraction on the compressive modulus, strain energy, and effective strength.
This chapter describes the mechanical properties of POFs, such as Young's modulus, strain, stress, or strength, which result relevant in the performance of POFs, as well as in the aging and in the fabrication of new POF designs.
Mechanical Parameters, like strength, Young's Modulus, strain to failure and fracture energy at low temperatures (−20°C and −40 °C) with different strain rates were investigated.
It can be observed that experimental results related to the evolution of dynamic modulus, strain, temperature and energy dissipation are important and consistently complement each other for damage evaluation of PA66/GF30.
In this work, a substantial indentation test series was performed in order to determine hardness, Young's modulus, strain-rate sensitivity and activation volume at room and elevated temperatures up to 300 °C.
Additionally, the modulus-strain profile provides the maximum modulus G0 in the linear range and the value of critical strain (Y0) at which the value G′ starts to decrease sharply due to the loss of cross-linking within the gel network.
Among them are the impact toughness, Young's modulus, maximum strain and stress and glass transition temperature.
Compressive strength, elastic modulus, critical strain, and toughness of the concrete were increased with strain rate.
The tensile modulus and strain to failure are also observed to increase slightly by increasing the strain rate.
