Sentence examples for modulus of modified from inspiring English sources

The dynamic mechanical analysis (DMA) results indicated that the storage modulus of modified epoxy increased with the increasing content of AA-PPA, while the loss modulus decreased.

The obtained results of the CTE and Young's modulus of modified Schapery and Halpin-Tsai theories have good agreement with the experimental results.

The results indicated that compared with rABS, the molecular weight, impact strength, tensile strength, storage modulus and loss modulus of modified rABS were apparently improved.

With the enhancement of the content of diatomite to asphalt, both viscosity and complex modulus of modified asphalt binders increased rapidly at high temperatures.

The results indicate that the complex modulus decreased whereas the phase angle increased with the increasing of temperature and frequency, the complex modulus of modified bitumen exhibit good linear relationship with the logarithmic value of loading frequency.

The effective modulus of the modified composite film is 13.54 GPa compared to the 1.67 GPa of the pure film.

Moreover, a model was developed to predict the resilient modulus of PET modified mixes based on the indirect tensile strength and testing temperature.

The loss modulus of the modified MWCNTs is bigger than the storage modulus, which is a characteristic of a solvent-free nanofluid.

The reported decrease in the previous work of the Young's modulus of the modified epoxy system due to the introduction of flexible PES is offset by the increase of the modulus due to the introduction of MWCNTs.

Radiation-induced changes in the layer structure result in an increase of the hardness and elastic modulus of the modified layers up to ten and six times, respectively.

The best systems gave GIc values up to 5.5 times those of the standard TGMDA-DDS formulation, while the addition of CTBN further increased this to up to 24 times; in comparison, addition of CTBN to the base formulation effected a threefold increase in GIc; there is however some lowering of the glass transition temperature and modulus of the modified resins.