Sentence examples for modulus of mixtures from inspiring English sources

The test results of the mixtures indicated that compared with the original asphalt mixture and the styrene butadiene styrene (SBS) mixture, the HMABs significantly improved the high temperature performance, water stability, moisture heat synthesis property, and dynamic modulus of mixtures.

The results showed that stiffness modulus of mixture increased at lower amount of PET content; however, adding higher amount of PET made mixture less stiff.

In addition, it was observed that the addition of capsules did not improve the stiffness modulus of asphalt mixtures compared to mixtures without capsules, and that the mixing order and the ageing time did not have a significant influence on the flexural strength of the mixtures.

Also it was shown that the concept of the resilient modulus master curve can be used successfully to represent the resilient modulus of asphalt mixtures in a wide range of mix temperatures and frequencies.

The results show that Nano Fe2O3 can improve the mechanical properties of stone mastic asphalt to an acceptable level so that the stiffness modulus of the mixtures have improved due to using nano-material and the mixtures strength is also enhanced against the fatigue.

The use of RCA had no significant influence on the permanent deformation, while the stiffness modulus of asphalt mixtures with RCA was lower compared with the control mixture, especially at high frequencies.

In this paper, a three-dimensional DEM approach is developed to model the complex modulus of asphalt mixtures.

The indirect tensile stiffness modulus of the mixtures increased with the addition of RAP.

Also, bentonite leads to relative increase in indirect tensile strength and resilient modulus of asphalt mixtures.

Basically, the dynamic modulus of asphalt mixtures depends on the test temperature (strongly related) and load frequency, the mix type, the material properties and the test methods.

Elastic modulus of asphalt mixtures is more sensitive to aging time than that of strength and modulus at failure.