Sentence examples for modulus is increased from inspiring English sources

In consistency with the EDX and the DMA data, in the vicinity of the PVP layer the local epoxy modulus is increased.

It is further shown that the elasticity modulus is increased by gas adsorption to the solid surface at elevated pressure and, thus, explains the effect of gas pressure on bed expansion.

It can also be seen that the elastic modulus is increased with the addition of hydrogen; the hardness increased monotonically from 5%to15%5% hydrogen, then decreased for 20% hydrogen with the maximum at 15% hydrogen; and the elastic recovery is 72 78%.

It is found that the critical flutter load for a cantilever Timoshenko beam subjected to an end-concentrated or linearly distributed tangential follower force will first decrease as the elastic foundation modulus is increased and, as the elastic foundation modulus increases beyond the corresponding critical value, which corresponds to the lowest critical flutter load, it will increase instead.

For these fibre angles, it is also shown that the out-of-plane Young's modulus can be orders of magnitude larger than the in-plane moduli and that as the fibres are stiffened, the out-of-plane modulus is increased proportionally more than the in-plane moduli.

It is found that the critical flutter load for the cantilever Timoshenko beam will first decrease as the elastic foundation modulus is increased and when the elastic foundation modulus is greater than the corresponding critical value, which corresponds to the lowest critical load, it will increase, instead.

Since θ is a lacunary sequence and f being modulus is increasing, the term on the right hand side of (4.4) is a regular weighted mean transformation of (t=(t_{r})), and therefore, it, too, tends to zero as (r toinfty).

The residual stress, the hardness and reduced modulus are increased with percentage of hard-layer thickness.

With GO-g-PCL and AGO-g-PCL, the modulus was increased by 76% and 71%, respectively.

In all the composites, the peak stress, toughness and modulus were increased with strain rate.

In graphene composite with 2.5 wt% additive content, the tensile modulus was increased by 1.95 times that of pure polymer.