Sentence examples for modulus increased from from inspiring English sources

The elastic modulus increased from 180 GPa for as-fabricated, to 245 GPa for high temperature heat-treated nanofibers.

The compression strength of the scaffolds was found to increase from 1.94 to 9.32 MPa, while the compressive modulus increased from 1.73 to 5.25 MPa as the fillers' content increased from 0 wt% to 30 wt%.

By reinforcing the hydrogel with a wet-laid fibrous mat, the ultimate tensile strength and modulus increased from 0.11 ± 0.01 MPa and 0.17 ± 0.02 kPa to 0.24 ± 0.02 MPa and 5.76 ± 1.12 kPa, respectively.

The normalized compressive plateau stress and Young's modulus increased from 52.27 MPa to 85.43 MPa and from 1.850 GPa to 2.540 GPa, respectively, with Nb contents increasing from 5%to15%5%to15%

For instance, the tensile modulus increased from 1.98 ± 0.09 MPa to 3.88 ± 0.20 MPa when the macromer went from a linear structure to a more branched structure with the addition of PETA.

The compressive strength of the composite scaffolds increased from 0.48 to 0.66 MPa, while the compressive modulus increased from 7.29 to 8.23 MPa as the microspheres' contents increased from 0%to50%0%to50%

The copper electroplating technique improved these two properties, with the modulus increasing from 4.5 to 8.6 MPa for the sample electroplated for 40 min and the plateau stress increasing from 54 to 171 kPa for the foam coated for 80 min.

The confined compression modulus increased 180% from the fetus to the calf and adult.

Relative to neat epoxy, at 15 wt.% CNC the storage modulus increased by 100%, the Tg increased from 66.5 °C to 75.5 °C, and tensile strength increased from 40 MPa to 60 MPa, suggesting good adhesion between epoxy and CNC surfaces exposed to the matrix.

In the period 1954 2009, the average annual rate of temporal change of runoff modulus increased acceleratedly outward from the northwest of the middle Yellow River with a concentric ring pattern.

In this system, the elastic modulus increased continuously by 50% from the contact surface to a depth of about 2 mm beneath the surface, with essentially no long-range residual stresses.