Sentence examples for modulus combination from inspiring English sources

Here, R is the size of the counterface ball, K the effective elastic modulus (combination of elastic modulus of coating and counterface), Fn the applied normal load and γ the interfacial energy.

The fibre architecture was found to have a strong effect on the fatigue behaviour, where higher static strength and modulus combinations present the best fatigue characteristics.

Nanocomposites like nc-TiC/a-C H show promisinc-TiC/a-C Honc-TiC/a-C Htieshowch as high hardness and Young's modulus combined with low friction and wear.

Porous implants are known to promote cell adhesion and have low elastic modulus, a combination that can significantly increase the life of an implant.

Nanodiamond, due to its superior hardness and Young's modulus in combination with its large surface area holds great potential for the mechanical reinforcement of polymer matrices.

Data of monolith compression modulus in combination with developed mathematical model can therefore be used for the prediction of monolith permeability during its implementation but also to accelerate the design of novel chromatographic monoliths with desired hydrodynamic properties for particular application.

The results show the compressive strain and the elasticity modulus depend on the combination of the marble particle sizes and the applied radiation dose.

Conversely, we find the variation with r of the shear modulus for a linear combination of the radial and the hoop stresses to have a pre-assigned variation in the cylinder; this inverse problem is usually called material tailoring.

This structure results in useful combinations of modulus, strength and toughness and therefore is increasingly mimicked in bio-inspired engineering composites.

A TiN coating was deposited using ion-assisted PVD onto a number of substrates with differing combinations of modulus and hardness [i.e. a range of Young's modulus (E) to yield stress (Y) E/Y ratios].

However, previous research regarding the performance of concrete pavement in Florida indicated that the optimal concrete mixture for concrete pavement was not necessarily a concrete with a high flexural strength, but a concrete with a proper combination of low modulus of elasticity, low coefficient of thermal expansion, and adequate flexural strength (Tia et al. 1991).