Sentence examples for modulus and uniaxial from inspiring English sources

Dynamic modulus and uniaxial creep test were conducted to characterize the material properties of asphalt mixtures.

In addition to traditional reservoir simulation, the integrated flow model can be used to estimate seismic velocities, Poisson's ratio, Young's modulus, and uniaxial compaction.

The Young's modulus and uniaxial flow stress of pure aluminium (99.99%) open-cell sponges produced using the replication process with preforms of 400 μm diameter NaCl particles are measured in tension and compression.

The experimental results indicated that the uniaxial stress strain curve for frozen clay with thermal gradient presents elastic-linear strain hardening characteristics, both the hardening modulus and uniaxial compression strength increase as the thermal gradient and average temperature decreased, but the elastic modulus varies little as the thermal gradient increased.

The thermal gradient presents weakening effects to the local axial strain rate at middle specimen height of δεa,H= 10′/δt in frozen clay with identical average temperature, and that further lead to the decrease of hardening modulus and uniaxial compression strength.

Under this loading regime, the Young's modulus, shear modulus and uniaxial yield strength may vary through the section depth because of the temperature gradient, and as a result predicting the local buckling capacity and the critical geometrical slenderness for coincident elastic local buckling and yielding are not straightforward.

Elastic modulus (E) and uniaxial compressive strength (UCS) are very important engineering parameters that is required for many engineering projects.

We measure the stress-strain response of homogeneous, fine-grained Seeberger sandstone and Carrara marble in uniaxial compression at strain rates ranging from 10+1 to 10+2 s−1 with respect to tangent modulus and dynamic uniaxial compressive strength.

Mechanical behaviours of the new composites, including compressive strength, Young's modulus, bending behaviour and uniaxial tensile behaviour, are investigated experimentally.

This practical approach is presented by examining an actual cylindrical mine pillar in a copper mine and taking into account uncertainties in ore pillar material parameters including modulus, Poisson's ratio, density and uniaxial compressive strength.

There was good agreement in the measured elastic modulus between the instrumented indentation and uniaxial tension tests for the case of a nanocomposite with a harder epoxy matrix material.