Sentence examples for modules in series from inspiring English sources
The EV has three lithium-ion battery packs consisting of a total of 20 battery modules in series.
In general, a higher efficiency was obtained diminishing the quantity of modules in series and increasing their number in parallel.
In general with n modules in series the maximum power gain is expected to be (100/n)%.
A new GAM module design allowed for the connection of modules in series, intermediate data sampling points, and removable membrane cartridges.
After a preliminary assessment, the membrane separation section is selected and designed on several membrane modules in series with adiabatic high temperature shift in between.
During operation, the battery stack is transformed into the round frisbee to connect eight MFC modules in series for improving the power output and simultaneously expose all air-cathodes to the air for their cathodic reactions.
The computed results were then comparatively evaluated against a set of result samples obtained from testing data of the 16 modules of PV/T system a configuration with 4 strings (horizontal-axis) of 4 modules in-series (vertical-axis) (4×4).
The dendrimer-IL system performance for two modules-in-series with reduced dead volume considerably enhanced separation yielding >95% CO2 in the CO2-enriched product; further this performance exceeded easily that of the PEG 400-based system.
In the second treatment module (in series), a microfiltration or ultrafiltration ceramic membrane was placed in order to separate suspended particles, macromolecules and/or arsenic.
An intensive combined treatment for removing 4-chlorophenol, consisting of its oxidation with soluble soybean peroxidase and hydrogen peroxide in a continuous tank reactor, followed by purification of the effluent in an ultrafiltration membrane module in series, is studied for the first time.
Whilst this reduction in removal efficiency can be compensated for by extending path length (i.e. more than one module in series), it is suggested that the gas-phase controlled conditions encountered were also a product of poor shell-side dispersion rather than an approach toward the limiting theoretical gas-to-liquid ratio.
