Sentence examples for module to reduce from inspiring English sources

As a comparison, in the ROD WLANs, a wake-up transceiver shares antenna with the co-located WLAN module to reduce the hardware cost.

Furthermore, we introduce a low-overhead module to reduce the relative error and a sign correction module to fix the sign error.

During the calculation of CCC, we apply a mask around the target module to reduce the contribution from the non-target modules, thereby increasing the accuracy of parameter determination for the target module.

Recently, compressed domain (DCT, Discrete Cosine Transform) transcoding architectures have been proposed to achieve fast transcoding, in which DCT domain Inverse Motion Compensation (IMC) is the most important module to reduce computational complexity.

Therefore, this paper analyzes the performance of DCS based on each object-oriented middleware and presents some advanced service modules to reduce network delays.

Two different concepts were explored: (i) serially connected stripe modules (to reduce the Ohmic losses) and (ii) monolithic modules (to achieve high geometric fill factor and increase the flexibility of the process).

Low cost reflectors were applied to dye-sensitized solar cell modules to reduce the energy losses caused by the inactive areas occupied by sealing materials and metal fingers, and significant improvement of overall efficiency was achieved.

As many contemporary Photovoltaic (PV) Power systems being installed are designed to produce significant amount of electricity and claimed to operate for 25 years or more, appropriate grounding on PV modules to reduce or eliminate shock and fire hazards becomes a critical issue under high electricity output and long-term use.

In this paper, we propose a sequential execution of module I and module II to reduce the computational burden at the receiver.

As expected, the doping module allows to reduce the theoretical error floor to a value too low to be observed in the simulations both in Figures 14 and 15. Figure 14 BER of BICM-ID with 8PSK, AWGN channel, and 2 bits/channel use. Figure 15 BER of BICM-ID with 8PSK, Rayleigh fading channel, and 2 bits/channel use.

RO membrane suppliers generally recommend that the 15-min Silt Density Index (SDI15) should be less than 3 to minimise problems caused by suspended solids blocking the brine spacers of the RO membrane module and to reduce fouling of the RO membrane itself.